2-TLX XL Overview
Showing 10–18 of 19 results
-
Bearings (9 pieces set)
Part Number: 110038A
-
Conversion Kit 2-TLX (2-TLX40)
The 2-TLX Conversion kit, when combined with the TLX Drive Unit, creates the Dual Lance Feeder from the TLX Series (2-TLX40). It can also be used to convert a 1-TLX, 3-TLX, 4-TLX, or 5-TLX to a 2-TLX40. When converting a 1-TLX to a 2-TLX40, it is important to include a standard cover in your configuration, as the 1-TLX only comes with an extra high cover to accommodate the second motor.
The standard 2-TLX is also commonly referred to as the 2-TLX40. Both of these product names can be used interchangeably to describe the same item
Part Number: 710206R
-
3-TLX Conversion Kit
The 3-TLX Conversion kit, when combined with the TLX Drive Unit, creates the Triple Lance Feeder from the TLX Series (3-TLX). It can also be used to convert a 1-TLX, 2-TLX, 4-TLX, or 5-TLX to a 3-TLX. When converting a 1-TLX to a 3-TLX, it is important to include a standard cover in your configuration, as the 1-TLX only comes with an extra high cover to accommodate the second motor.
Part Number: 710206S
-
Conversion Kit 4-TLX
Conversion Kit 4-TLX consisting of :
P/N 710036MAB Track Heavy Duty 4-TLX. For 3/2, 4/2, 5/2 & 4/4. 5-Lance. Set, 2 ea.
P/N 710204I Lance Block 4-TLX. Complete with 4 ea. Fixed Guide Tubes 1/2″ TLX, SCH40. L= 400 mm / 15.748″, ID= 15.9 mm / 0.625″
P/N 710012B Pitch Adjuster 1/2″, 4-TLX
P/N 710628 Front Hose Guide 4-TLX
P/N 710632 Rear Inlet 4-TLX
SKU 710206T
-
Conversion Kit 5-TLX
The 5-TLX Conversion kit, when combined with the TLX Drive Unit, creates the Quintuple Lance Feeder from the TLX Series (5-TLX). It can also be used to convert a 1-TLX, 2-TLX, 3-TLX, or 4-TLX to a 5-TLX. When converting a 1-TLX to a 5-TLX, it is important to include a standard cover in your configuration, as the 1-TLX only comes with an extra high cover to accommodate the second motor.
Part Number: 710206U
-
H-Frame Setup (for Flex Frame 3.0 (4″ rails))
The additional H-Frame Setup seamlessly integrates with the Flex Frame 3.0 (4″ rails). It includes all the necessary components to effectively clean a wide range of design bundles, whether they are large, small, horizontal or vertical. With just a few extra components, added on top of the 2-XLTC + Flex Frame 3.0 (4″ rails) setup, you can unlock tremendous flexibility in your cleaning capabilities.
-
Scaffold Pipe Setup (for Flex Frame 3.0 (4″ rails)) excl. Scaffolding
Almost similar to an H-frame configuration but mounted within a scaffold construction.
An ideal set up which can be used at a cleaning pad whereby you easily move the set up from bundle to bundle.
Excluding scaffolding.
-
Scaffold Pipe Setup (for Flex Frame 2.5″)
Almost similar to an H-frame configuration but mounted within a scaffold construction. An ideal set up which can be used at a cleaning pad whereby you easily move the set up from bundle to bundle. Works seamlessly with the Flex Frame 2.5″.
-
Vertical H-Frame Setup with Support Legs (for Flex Frame 2.5″)
An H-Frame set up which is designed for mainly large vertical bundles. The scaffold clamps and support legs will allow for a quick set up without the requirement of securing it direct onto a bundle flange. Often this type of set ups do not require additional permission from the plant. This setup works seamlessly with the Flex Frame 2.5″.
