All
Showing 136–144 of 146 results
-
End Stop 8/2, Ø 13.5 mm / 0.532″
Part Number: 110024s
-
Conversion Kit 2-TLX (2-TLX40)
The 2-TLX Conversion kit, when combined with the TLX Drive Unit, creates the Dual Lance Feeder from the TLX Series (2-TLX40). It can also be used to convert a 1-TLX, 3-TLX, 4-TLX, or 5-TLX to a 2-TLX40. When converting a 1-TLX to a 2-TLX40, it is important to include a standard cover in your configuration, as the 1-TLX only comes with an extra high cover to accommodate the second motor.
The standard 2-TLX is also commonly referred to as the 2-TLX40. Both of these product names can be used interchangeably to describe the same item
Part Number: 710206R
-
Conversion Kit 4-TLX
Conversion Kit 4-TLX consisting of :
P/N 710036MAB Track Heavy Duty 4-TLX. For 3/2, 4/2, 5/2 & 4/4. 5-Lance. Set, 2 ea.
P/N 710204I Lance Block 4-TLX. Complete with 4 ea. Fixed Guide Tubes 1/2″ TLX, SCH40. L= 400 mm / 15.748″, ID= 15.9 mm / 0.625″
P/N 710012B Pitch Adjuster 1/2″, 4-TLX
P/N 710628 Front Hose Guide 4-TLX
P/N 710632 Rear Inlet 4-TLX
SKU 710206T
Part Number: 710206T
-
Conversion Kit 5-TLX
The 5-TLX Conversion kit, when combined with the TLX Drive Unit, creates the Quintuple Lance Feeder from the TLX Series (5-TLX). It can also be used to convert a 1-TLX, 2-TLX, 3-TLX, or 4-TLX to a 5-TLX. When converting a 1-TLX to a 5-TLX, it is important to include a standard cover in your configuration, as the 1-TLX only comes with an extra high cover to accommodate the second motor.
Part Number: 710206U
-
Box Rail, 4″, 1 ft. (Quantity = Rail Length : 4x = 4′, 10x= 10′, etc)
Part Number: 523350110-1FT
-
End Stop 10/4, Ø 20.0 mm / 0.787″ (1)
Part Number: 710021A
-
Rail 4″, Dual Slotted. 6′ Length. Suitable for rail connector
4″ Boxrail 1.82 m / 6′
Dual Slotted with two holes on both sides. (suitable for rail connector)
Part Number: 523350110-6FTH2
-
End Stop 8/4, Ø 14.5 mm / 0.571″
Part Number: 110025s
-
Air Filter, Regulator & Lubricator (FRL)
Part Number: 110033
